Removing The Finisher Controller Pcb; Removing The Slide Home Position Pcb - Panasonic DP-C305 Service Manual

12.1.3.1.3. PCBs
[2]
[1]
[1]
[4]
[5]
[4]
Ver. 1.1
[3]
[1]
[1]
[4]
Fig. 3-072
[2]
Fig. 3-073
[3]
Fig. 3-074

3-1. Removing the Finisher Controller PCB

(1) Remove the Rear Cover. (See Removing the
Rear Cover)
(2) Disconnect 17 Connectors [1], and remove 1
Screw [2].
(3) Free the PCB Retainer [3], and detach the
Finisher Controller PCB [4].

3-2. Removing the Slide Home Position PCB

(1) Open the Front Door [1], and turn the Tab [2] on
the stapler slide in the direction of the arrow to
slide the Stapler to the front most point.
(2) Remove the Stapler Unit. (See Removing the
Stapler Unit)
(3) Place the Stapler Unit [3] as shown.
(4) Remove 2 Screws [4], and detach the Guide [5].
831
DP-C405/C305/C265
FEB 2008