Panasonic DP-C305 Service Manual page 645

3. Press the "9" key on the Control Panel, and then press the "Start" key to enter the F9 Service Mode.
4. Select "00 Fax Service Mode" on the Touch Panel display.
5. Select "01 Function Param. Setting" on the Touch Panel display.
6. Scroll the menu with the "
and then select the "Input" buttons.
7. Input the new Destination Code, and select the "OK" button on the Touch Panel display.
8. Select the "Close" button three time on the Touch Panel display.
9. Press the "Function", and the "C (Clear)" keys simultaneously on the Control Panel to exit the
Service Mode.
10. Turn the Power Switch on the Left side of the machine to the OFF ( ) , and back to the ON ( I )
position to enable the parameter settings.
Ver. 1.1
" button on the Touch Panel display, and select "05 Destination Code",
645
DP-C405/C305/C265
FEB 2008