Panasonic DP-C305 Service Manual page 171

Ver. 1.1
(71) Remove the DC12 Harness and the HD2
Harness from Harness Clamps.
(72) Disconnect the DC12 Harness on the DC12 PC
Board (CN141 and CN142).
(73) Disconnect the HD2 Harness on the DC12 PC
Board (CN143).
Caution:
When reinstalling 2 Harnesses, the Tie Wrap
should be located on the right side of the Harness
Clamp as illustrated.
(74) Disconnect the SATA Harness from the HDD
Connector.
Caution:
When reinstalling the SATA Harness, take note of
the connector position. Insert it gently, and do not
force the connector if it is facing the wrong way,
and exercise care to prevent the HDD from Shock
and Vibration damage.
(75) Remove 1 Screw, and Ground Harness.
Caution:
When reinstalling the Ground Harness, make sure
that the Terminal is Horizontal position as
illustrated, and exercise care to prevent the HDD
from Shock and Vibration damage.
(76) Remove 4 Screws (4012) from the HDD
Bracket Unit.
(77) Remove the HDD Bracket Unit from the HDD.
Caution:
Exercise care to prevent the HDD from Shock and
Vibration damage.
171
DP-C405/C305/C265
FEB 2008