Paper Exit And Paper Switchback; Normal Printing Mode; Outer Exit Tray / Finisher With Paper Transfer Unit - Panasonic DP-C305 Service Manual

6.4.8.

Paper Exit and Paper Switchback

After Fusing, the paper is fed to the Inner Paper Exit Tray, the ADU, or to the Optional Paper Transfer Unit.
The paper path is switched by the combination of ADU Path Switching Solenoid ,Three-step 2-Way Roller,
and Paper Exit Path Switching Solenoid.
6.4.8.1.

Normal Printing Mode

The ADU Path Switching Solenoid keeps ON, and the Lever is switched to the Upper side, the paper is fed
through the lower path, and is transported into the Three-step 2-Way Roller.
1. Inner Exit Tray
To Optional Paper
Transfer Unit
Inner Paper Exit Tray
The Paper Exit path Switching Solenoid keeps OFF, and the Lever is switched to the Upper side, the
paper is fed by the 2-Way roller, and is transported through the lower path, and out to the Inner Paper
Exit Tray.
When the Inner Paper Tray is full, the Paper Full sensor detects, stops printing, and displays the Error
message on the LCD Panel.

2. Outer Exit Tray / Finisher with Paper Transfer Unit

The Paper Exit path Switching Solenoid keeps ON, and the Lever is moved to the lower side, the paper
is fed by the 2-Way roller, and is transported through the Lower path, and carried to the Paper Transfer
Unit, then goes out to the outer Paper Tray, or Finisher.
Ver. 1.1
Paper Exit Path
2-Way Roller
Switching Solenoid
OFF
610
Clutch Reverse Clutch
ADU Path Switching
ON
Paper Full Sensor
DP-C405/C305/C265
Solenoid
ADU Path
From Fuser Unit
FEB 2008