Exposure Adjustment - Panasonic DP-150 Service Manual

1. Exposure adjustment

Figure
Text/Photo mode
A
1 Invisible
2
Slightly
visible
3
Procedure
Image density adjustment
1
Make sure that "F6-C17, C19" is "0".
2 Confirm the image with the
(The exposure is at the center in the
manual mode and the text/photo mode.)
3 When copying the gray scale (P/N
FQ-SJ101), 1 must be invisible. 2 must
be slightly visible.
Move to "F6-C50" mode.
4
5 Enter the adjustment value.
Press Exposure key for "–" value.
Press Start key.
6
1
Perform the procedure to
7
sure the image density is adjusted
correctly.
(When re-adjustment is required, Perform
the procedure 4 to 6 .)
Use the following code for other image
8
quality mode adjustments.
9 For Photo mode
The gray scale A must be invisible. 1 must
be slightly visible.
F6-C51 : Photo mode
Note: Confirm image quality meets
customers requirements.
F2 mode.
3
and make
3-29