Table of Contents
Advertisement
Store to USB
This section describes the procedure to select features on the [Store to USB] screen.
The Store to USB service allows you to scan documents and save the scanned data to
a USB memory device. The following describes features available on the [Store to
USB] tab. The following shows the reference section for each feature.
Save in (Specifying a Storage Location in the USB Memory Device).................................... 271
Details (Displaying the Details of a Storage Location in the USB Memory Device).............. 272
Preview (Previewing the Scanned Images during a Scan Job) ................................................ 272
Color Scanning (Selecting an Output Color) ........................................................................... 272
2 Sided Scanning (Scanning Both Sides of a Document) ........................................................ 272
Original Type (Selecting the Document Type) ........................................................................ 273
File Format (Selecting a File Format for Output Data)............................................................ 273
Important • Before removing the USB memory device, make sure that the screen indicating that data is
Note
• This feature may not be available depending on the setting in the CentreWare Internet
• An optional component is required to use this service. For more information, contact our
• A USB memory device and the Memory Card Reader cannot be used simultaneously. If they
• A USB memory device encrypted with software is not supported.
• Use the following USB memory devices:
• Commercially available Memory Card Reader with single slot *1 can be used for this feature,
• When a Memory Card Reader with multi-slot *2 is used, only one particular slot is available.
• And which slot is available differs according to models and slot of media\Memory Card that
You can customize the layout of the features displayed on the [Store to USB] screen. For more
information, refer to "5 Tools" > "Scan Service Settings" > "First Tab" in the Administrator Guide.
1
Insert the USB memory device into the USB memory slot on the control panel.
2
One of the following occurs.
[USB Device Detected] screen appears.
[Store to USB] screen appears.
[Media Print - Text] screen appears.
Screen display does not change.
Note
• Behavior depends on settings. Ask your system administrator for more information.
being transferred is not displayed. If you remove the USB memory device while the data is
being stored, the data in the device may be damaged. You can also view the [Job Status]
screen to confirm if the data has been stored to the USB memory device.
Services. For more information, refer to "6 CentreWare Internet Services Settings" >
"Configuring Machine Settings Using CentreWare Internet Services" in the Administrator
Guide.
Customer Support Center.
are connected simultaneously, proper operation cannot be guaranteed.
• A formatted USB memory device
• A USB 2.0 compliant memory device (USB 1.1 is not supported.)
• A USB memory device with a storage capacity of up to 128 GB
but its safe performance is not guaranteed.
you want to use is not always available. Safe performance of a Memory Card Reader with
multi-slot is not guaranteed, either.
*1: Media/Memory Card that has one slot. Some allows only one type of media/Memory
Card, while others allows more than one types (ex. SD card, xD-Picture Card).
*2: Media/Memory Card that has two or more slots.
Store to USB
5
267
Advertisement
Table of Contents
