Resolution (Specifying The Scanning Resolution); Original Type (Selecting The Document Type) - Fuji Xerox DocuCentre-IV 3065 User Manual

4 Fax

Resolution (Specifying the Scanning Resolution)

You can set the resolution for the documents to be scanned.
Note
You can specify the resolution for each address number. For information on how to register address
numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
1
Select [Resolution].
Standard (200 x 100 dpi)
Select this option when transmitting standard documents.
4
(200
Fine (200 dpi)
Select this option when transmitting documents with small text or detailed images.
(200
Superfine (400 dpi)
Select this option when transmitting documents with fine images.
(400
Superfine (600 dpi)
Select this option when transmitting documents with extremely fine images.
(600

Original Type (Selecting the Document Type)

You can select the type of the original document, such as text and photo documents.
1
Select [Original Type].
Text
Select this option when transmitting a document that contains only text.
170
• The machine scans a document at the specified resolution, but if the recipient's machine
does not support the resolution, the machine automatically changes the resolution to one
supported by the recipient's machine and there is a corresponding loss in quality.
• The higher the resolution, the lower the transmission speed. Usually, we recommend that
you select [Superfine (400 dpi)] or lower.
• Only [Fine (200 dpi)] is available for the Server Fax service.
× 100 pels/25.4 mm)
× 200 pels/25.4 mm)
×
400 pels/25.4 mm)
× 600 pels/25.4 mm)