Original Size (Specifying The Scan Size For The Document) - Fuji Xerox DocuCentre-IV 3065 User Manual

Hide thumbs Also See for DocuCentre-IV 3065:
Table of Contents

Advertisement

Original Size (Specifying the Scan Size for the Document)

This feature allows you to specify the scan size for a document.
Use this feature when a document is a non-standard size, or when you want to copy a
document at a size different from the original size. You can also add margins, or delete
unnecessary margins using this feature.
1
Select [Original Size].
2
Select the size of the document.
If you select a non-standard size, specify
values for the X and Y directions.
Auto Detect
Detects the document size automatically. The following table shows the document
sizes that can be detected automatically.
Auto-detectable
Document Sizes
Note
• If the document size cannot be detected automatically, a screen to enter the document size
The document sizes that can be automatically detected depend on [Paper Size Settings] in the System
Administration mode. For more information, refer to "5 Tools" > "Common Service Settings" > "Other
Settings" > "Paper Size Settings" in the Administrator Guide.
Standard Size
Select a document size from preset options.
You can change the sizes displayed on the screen. For information, refer to "5 Tools" > "Copy Service
Settings" > "Original Size Defaults" in the Administrator Guide.
Variable Size
Enter the desired scan size when scanning a non-standard size document or when
making copies at a size different from the original document size. You can specify a
value in the range from 15 to 432 mm for the width (X), and a value in the range from
15 to 297 mm for the length (Y), in 1 mm increments. To help you specify values, use
the scales attached on the upper and left edges of the document glass.
Important • When the document is loaded in the document feeder, the base point in the Y (length)
Document Feeder
B5, B5 , B4, A5, A5 , A4,
A4 , A3, 8.5 × 11",
8.5 × 11"
8K
appears.
direction is the center of the edge. If you specify 100 mm, the scan length will be from 50 mm
above to 50 mm below the center of the document.
Document Glass
B6, B5, B5 , B4, A6, A5,
A5 , A4, A4 , A3,
,
11 × 17", 16K
,
8.5 × 11" , 11 × 17", 16K,
16K , 8K, 8K
Layout Adjustment
3
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucentre-iv 2060Docucentre-iv 3060

Table of Contents