Table of Contents
Advertisement
Store to WSD
This section describes the procedure to select features on the [Store to WSD] screen.
The Store to WSD service allows you to scan documents set on the machine from a
network computer. It also allows you to save the scanned data to a network computer.
Note
• [Store to WSD] may not appear on the [Services Home] screen for some models. For more
• This feature requires the scanner driver included as standard in Windows Vista Service
• Resolution, file format and so on cannot be specified from the control panel of the machine.
1
Select [Store to WSD] on the [Services
Home] screen.
2
Select a feature on the [Store to WSD]
screen.
Start Scan Job From
Select from where to start a scan job.
Computer
Starts a scan job by sending a request
from a network computer.
This Device
Starts a scan job with the scan command
from the machine, and save the scanned data to a network computer.
List of Computer
Lists network computers and their scanning methods. Select one from this list as
destination.
Computer (Starting a Scan Job via Computer Operation)
You can scan documents set on the machine by sending a request from a network
computer.
1
Select [Computer].
information, refer to "9 Scanner Environment Settings" > "Configuration of Store to WSD" in
the Administrator Guide.
Pack 2 or later. Thus, this feature is not available for computers with older OS.
Specify these settings in [Scan Profiles] of Windows. For more information on how to
specify the settings, refer to Windows Help.
Store to WSD
5
277
Advertisement
Table of Contents
