Table of Contents
Advertisement
3 Copy
When [Enlargement %] is Selected
This screen allows you to specify a different ratio for the width and length.
1
Use [+] and [-] to specify the copy ratios for
the width and length.
Width - X%/Length - Y%
Allows you to specify the copy ratios for the width and length in the range from 100 to
400% in 1% increments.
Lock X - Y%
Allows you to make the same ratio adjustment for the width and length at the same
time.
3
Repeat Image (Making Multiple Copies on One Sheet)
This feature allows you to copy a document image on one sheet of paper repeatedly
for a specified number of times.
When [Reduce/Enlarge] is set to [Auto %], the repeated copies of the image are
reduced to fit on the selected paper. You can also specify how the repeated copies of
the image are arranged.
Note
1
Select [Repeat Image].
2
Select any option.
Off
Disables this feature.
Auto Repeat
Automatically determines the number of the repeated copies according to the
document size, paper size, and copy ratio, and then repeatedly copies the document
image onto the paper.
Note
112
• When making copies at the same size as the document image, the number of repeats is
specified so that the copies fit on the paper.
• If [Auto Select] is selected in [Paper Supply], a tray specified in [Auto Paper Off] is
automatically selected. Change the setting if necessary. For information, refer to "5 Tools" >
"Copy Service Settings" > "Copy Control" > "Auto Paper Off" in the Administrator Guide.
• Copies cannot be made when the document image is larger than the specified paper size.
Advertisement
Table of Contents
