Sided Copying (Making 2 Sided Copies); Copy Output (Specifying Finishing Options); Pages Per Side (Copying Multiple Pages Onto One Sheet) - Fuji Xerox DocuCentre-IV 3065 User Manual

When [Standard Size] is Selected
Select [Standard Size], and from the lists displayed, select a paper size and then a
paper type.
1
Select a paper size and a paper type.
Note • Select [
When [Custom Size] is Selected
Enter the width and length of the original document on the screen displayed after
selecting [Custom Size].
Specify the X (width) in the range from 98 to 432 mm, and the Y (length) in the range
from 89 to 297 mm in 1 mm increments.
Important • If the X (width) of non-standard size paper is less than 140 mm, documents may not be
• When copying on both sides of non-standard size paper, specify the size in the range from
1
Enter a paper size using [+] and [-] or the
numeric keypad.
2
Select a paper type.
Note • Select [

2 Sided Copying (Making 2 Sided Copies)

This feature is the same as [2 Sided Copying] on the [Layout Adjustment] screen. For more information,
refer to "2 Sided Copying (Making 2 Sided Copies)" (P.90).

Copy Output (Specifying Finishing Options)

This feature is the same as [Copy Output] on the [Output Format] screen. For more information, refer to
"Copy Output (Specifying Finishing Options)" (P.125).

Pages per Side (Copying Multiple Pages onto One Sheet)

This feature is the same as [Pages per Side] on the [Output Format] screen. For more information, refer
to "Pages per Side (Copying Multiple Pages onto One Sheet)" (P.110).
] to return to the previous
screen or [ ] to move to the next screen.
copied properly.
140 to 432 mm for the X (width) direction and from 128 to 297 mm for the Y (length)
direction.
] to return to the previous screen or [ ] to move to the next screen.
Copy
3
85