Copy Output (Specifying Finishing Options) - Fuji Xerox DocuCentre-IV 3065 User Manual

Separator Tray
Allows you to select the paper tray to be used for the separators.
Select [More] to display the [Paper Supply - Separator] screen on which you can select
a tray.
Select other than [Auto Detect] for [Paper Size] on the [Tray 5] screen.
Note • When you use the bypass tray, select [Bypass] on the [Paper Supply - Separator Tray]
• For [Separator Tray], select one of the paper trays. Auto Paper Select feature is not
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
Screen" (P.84).
Separator & Handout
Allows you to select the paper tray to be used for the separators and handouts.
Select [More] to display the [Paper Supply - Separator & Handout] screen on which you
can select a tray.
Note • When you use the bypass tray, select [Bypass] on the [Paper Supply - Separator & Handout
• For [Separator & Handout Tray], select one of the paper trays. Auto Paper Select feature is
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
Screen" (P.84).
Handout Tray
Allows you to select the paper tray to be used for the handouts.
Detect] for [Paper Size] on the [Tray 5] screen.
Select [More] to display the [Handout Tray] screen on which you can select a tray.
Note • When you use the bypass tray, select [Bypass] on the [Handout Tray] screen.
• For [Handout Tray], select one of the paper trays. Auto Paper Select feature is not available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Handout
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
Screen" (P.84).

Copy Output (Specifying Finishing Options)

This feature allows you to select finishing options.
Note • This feature does not appear for some models. An optional component is required. For more
If the finisher is installed, each set of copies can be stapled, and then output. When the
Hole Punch Kit for Finisher-B1 is installed, copies can be punched.
1
Select [Copy Output].
screen.
available.
Tray] at the same time.
Select other than [Auto Detect] for [Paper Size] on the [Tray 5] screen.
Tray] screen.
not available.
& Handout Tray] at the same time.
Tray] at the same time.
information, contact our Customer Support Center.
Output Format
Select other than [Auto
125
3