Changing Scan Settings - Fuji Xerox DocuCentre-IV 3065 User Manual

5 Scan
3
Specify the view size from the drop-down
menu, and set [Current Page].
4
After the confirmation, select [Close] to close
the preview screen.

Changing Scan Settings

You can change scan settings while scanning the document.
Note
1
Select [Next Original].
5
2
Select [Change Settings].
3
Set [Color Scanning], [Original Type],
[Resolution], [Lighten/Darken], [Original
Orientation], [2 Sided Scanning], and [Original Size].
The following shows the reference section for each feature.
"Color Scanning (Selecting an Output Color)" (P.246)
"Original Type (Selecting the Document Type)" (P.248)
"Resolution (Specifying a Scanning Resolution)" (P.285)
"Image Options (Adjusting Scan Density and Image Sharpness)" (P.281)
"Original Orientation (Specifying the Orientation of the Loaded Documents)" (P.291)
"2 Sided Scanning (Scanning Both Sides of a Document)" (P.285)
"Original Size (Specifying a Scan Size)" (P.287)
4
Press the <Start> button.
238
• For [Store to WSD], you cannot change scan settings while scanning the document.