Copy; Reduce/Enlarge (Making Enlarged/Reduced Copies) - Fuji Xerox DocuCentre-IV 3065 User Manual

Copy

You can select [Copy] or [Simple Copy] on the [Services Home] screen to set the
features for the Copy service.
This section describes the features you can select on the [Copy] screen. The following
shows the reference section for each feature.
Reduce/Enlarge (Making Enlarged/Reduced Copies)................................................................ 79
Paper Supply (Selecting the Paper for Copying) ....................................................................... 82
2 Sided Copying (Making 2 Sided Copies)................................................................................ 85
Copy Output (Specifying Finishing Options) ............................................................................ 85
Pages per Side (Copying Multiple Pages onto One Sheet) ........................................................ 85
Lighten/Darken (Adjusting the Copy Density) .......................................................................... 86
You can customize the layout of the features displayed on the [Copy] screen. For more information,
refer to "5 Tools" > "Copy Service Settings" > "Copy Tab - Features Allocation" in the Administrator
Guide.
1
Select [Copy] on the [Services Home]
screen.
2
Select a feature on the [Copy] screen.

Reduce/Enlarge (Making Enlarged/Reduced Copies)

This feature allows you to select a copy ratio to enlarge or reduce the size of copies.
1
Specify a copy ratio. You can use the
numeric keypad to specify a value, or [+] and
[-] to specify reduction/enlargement ratios
directly.
100%
Copies at the same image size as the original
document.
Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
Note • If you select [Auto %], an option other than [Auto Select] is selected in [Paper Supply].

Copy

3
79