Table of Contents
Advertisement
ID Card Copy (Copying Both Sides of an ID Card)
This feature allows you to copy both sides of a small undetectable original, such as an
ID card, onto one side of paper.
Original document
Front side
Back side
1
Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2
Place the document slightly away from the top left corner of the document glass, and
close the document glass.
Important • Always use the document glass when copying. You cannot use the document feeder with
• Specify the orientation of the original document correctly.
• If the edges of the image are missing, slightly move the card inward on the document glass
• When the reduced size is specified to copy an ID card, the machine may copy the ID card in a
For information on how to specify the orientation of a document, refer to "Original Orientation
(Specifying the Orientation of Loaded Documents)" (P.101).
3
Select [ID Card Copy] on the [Output
Format] screen.
Front side
this feature.
so that the whole image can be scanned.
different orientation from the original orientation depending on the magnification ratio specified.
For information on the copy magnification ratio for ID Card Copy, refer to "5 Tools" > "Copy
Service Settings" > "Copy Control" > "ID Card Copy - Reduce/Enlarge" in the Administrator
Guide.
Original orientation
Back side
Output Format
Copied output
3
129
Advertisement
Table of Contents
