Receiving Ip Fax (Sip) - Fuji Xerox DocuCentre-IV 3065 User Manual

4 Fax
3
Specify a recipient.
Example:Telephone number: 0312345678
SIP user name: 1111
SIP device address: 1111@192.168.1.1
Important • Method to input IP Fax (SIP) destination
For the method to specify a recipient using keyboard, refer to "Entering Text" (P.63).
For other methods to specify a recipient, refer to "Fax/Internet Fax" (P.172).
For the broadcast sending, refer to "Broadcast" (P.213).
4
Press the <Start> button.
Important • If the document has been loaded in the
4
Note
If a fax cannot be sent, refer to "14 Problem Solving"> Fax problem.
For the method to cancel sending fax, refer to "Stopping the Fax Job" (P.149)

Receiving IP Fax (SIP)

Received fax documents are printed automatically in a manner similar to that of a
regular fax.
For information on operations of the Remote Folder, refer to "Fax/Internet Fax" (P.172).
164
differs depending on the fax type of a
recipient or the connection configuration. For these differences, refer to "About Server Fax"
(P.165).
• Check the recipient information before sending the fax.
document feeder, do not hold down the
document while it is being conveyed.
• Fax cannot be sent if a copy protection code is
detected.
• Depending on the settings, a screen to reenter
the recipient may be displayed after you
specify the recipient. In such case, re-enter
the recipient.
• If a problem occurs, an error message
appears on the touch screen. Solve the
problem according to the message.
1 2 3
4 5 6
7 8 9
0 #
C
<Start> button