Booklet Creation (Creating A Booklet) - Fuji Xerox DocuCentre-IV 3065 User Manual

Booklet Creation (Creating a Booklet)

This feature lays out pages so that booklets are formed when the output sheets are
folded in half. You can also set the binding shift and attach a cover when making
booklets.
When the Booklet Maker Unit for Finisher-B1 (optional) is installed, you can also fold
the output sheets in half, or staple the folded output sheets.
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
• When the Finisher-B1 is installed, do not remove outputs from the finisher tray until all the
Note • The machine copies four pages of the document onto one sheet of paper. If the number of
• If [Auto Select] is selected in [Paper Supply], a tray specified in [Auto Paper Off] is
• This feature does not appear for some models. An optional component is required. For more
1
Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2
Select [Booklet Creation] on the [Output
Format] screen.
3
Select any option.
Off
Disables this feature.
Create Left/Top Bound Booklet
Copies are made to enable left binding or top binding.
Create Right Bound Booklet
Copies are made to enable right binding.
setting on the [Layout Adjustment] screen.
output sheets have been delivered.
pages in the booklet is not a multiple of four, the remaining pages will be output as blank
pages.
automatically selected. Change the setting if necessary. For information, refer to "5 Tools" >
"Copy Service Settings" > "Copy Control" in the Administrator Guide.
information, contact our Customer Support Center.
Output Format
3
105