Table of Contents
Advertisement
Control Panel
The following describes the names and functions of components on the control panel.
24
No.
Component
1
<Services Home> button
2
Touch screen
3
<Log In/Out> button
4
<Job Status> button
5
<Machine Status> button
6
<Energy Saver> button
7
<Interrupt> button
8
<Clear All> button
9
<Stop> button
1
23
22
21
20
19
18
Press this button to display the [Services Home] screen.
You can change the services displayed on the [Services Home] screen. For
more information, refer to "1 Before Using the Machine" > "Customizing the
Control Panel" > "Customizing the Button Layout" in the Administrator Guide.
Displays messages required for operation, and buttons for various
features. You can directly touch the touch screen to instruct operations
and set features.
Lights up when a user is authenticated in the System Administration
mode, the Authentication mode, or the Accounting mode. Press this
button to display the User ID entry screen for entering the System
Administration mode, the Authentication mode, or the Accounting mode.
Also press this button to exit these modes.
Press this button to check or cancel the current job, to check or print
stored jobs, or to check completed jobs.
Press this button to check the machine status and meters, to check the
status of consumables, and to print reports.
When the machine is not used for a while, it enters the Energy Saver
mode to reduce power consumption. When the Energy Saver mode is
active, the <Energy Saver> button lights up.
Press this button to exit the Energy Saver mode.
Press this button to suspend a copy or print job in progress to have the
machine process another job. During the Interrupt mode, the <Interrupt>
button lights up. Pressing the <Interrupt> button again exits the Interrupt
mode and resumes the suspended job.
Some types of jobs cannot be executed in the Interrupt mode. Refer to "15
Appendix" > "Notes and Restrictions" > "Notes and Restrictions on the
Interrupt Mode" in the Administrator Guide.
Returns the settings you made to the default values. The machine
returns to the same state as when it is powered on.
Press this button to stop the current job or communications.
2
3
1
2
4
5
7
8
0
C
17
16
15
Function
Control Panel
4
5
6
7
3
8
6
9
9
10
#
2
14
13
12
11
55
Advertisement
Table of Contents
