Id Card Copy (Copying Both Sides Of An Id Card) - Fuji Xerox ApeosPort-V C5575 User Manual

3 Copy
Paper Size and Punching Position (Finisher-B1, C3 Finisher, C3 Finisher with Booklet Maker)
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A4, A3, B4, 8 x 10"
11 x 15", 8.5 x 14", 11 x 17", 8K
3
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K
A4 , B5 , 7.25 x 10.5" , 8.5 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K

ID Card Copy (Copying Both Sides of an ID Card)

This feature allows you to copy both sides of a small undetectable original, such as an ID
card, onto one side of paper.
156
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled in the
orientation shown in the above table.
Finisher-B1 and C3 Finisher
*1
- 2 holes
*2
, 8.5 x 11", 8.5 x 13",
*1 : The distance between the two holes is 70 mm with the US 2/3 Hole Punch Kit, and is 80 mm with the 2/4 Hole Punch Kit,
which is normally used.
*2 : Only for the C3 Finisher
3 holes
4 holes
2 Holes 2 Holes Top
3 Holes 3 Holes Top
4 Holes 4 Holes Top
2 Holes
Right
3 Holes
Right
4 Holes
Right