Mounting The Cassette Heater Unit - Canon iR C3380 series Service Manual

Chapter 2

2.11.5 Mounting the Cassette Heater Unit

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1. Mounting to the cassette of the host machine
To operate the Cassette Heater Unit, the Heater PCB needs to be mounted.
1) Pull out the cassette 1 and 2.
2) While removing the hook by inserting the part indicated as [1] from the front side of the host machine with a flat blade screwdriver, detach the connector cover [2].
3) Fit the 3 hooks [2] of the heater unit [1] to the slit of the base plate to match the hole positions.
In the case of mounting the heater unit, make sure to check that the 3 hooks [2] are tightly fitted and there is no jiggle.
4) Mount the heater unit [1] with the screw (binding; M4X6) [2], and connect the connector [3].
5) Attach the connector cover [1].
6) Attach the plastic film [2] (for protecting the AC cable) over the cable [3] to fit the end of the connector cover [A] and the end of the rear side of the host machine
[B].
2-30
F-2-93
F-2-94
F-2-95
0014-2734