Installing The Inner 2 Way Tray; Checking The Components; Turning Off The Machine; Installation Procedure - Canon iR C3380 series Service Manual

2.17 Installing the Inner 2 Way Tray

2.17.1 Checking the Components

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
<Inner 2 Way Tray-D1>

2.17.2 Turning Off the Machine

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
How to Turn Off the Host Machine
When turning off the main power, be sure to go through the following in strict sequence to protect the machine's hard disk:
1) Hold down on the power switch on the control panel for 3 sec or more.
2) Operate on the touch panel according to the shut-down sequence indicated so that the main power switch may be turned off.
3) Turn off the main power switch.
4) Disconnect the power cable (for the power outlet).

2.17.3 Installation Procedure

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Fit the inside delivery tray [1] into the delivery assembly slot [2]; then, hook it on the rear cover slot [3] to secure it in position.
2) Plug the power cable (for outlet) into the outlet.
3) Turn ON the switch of the main power.
4) Enter the Service mode.
5) Set the menu flag below at 1.
COPIER > OPTION > ACC > IN-TRAY.
When '1' is set to this mode item, tray B will be enabled under 'delivery tray setup' in user mode.
F-2-199
T-2-5
[1] Inside paper tray
[3]
[1]
F-2-200
1pc.
[2]
Chapter 2
0014-0906
0014-5391
0014-0908
2-69