Right Door; Before Removing The Right Cover; Removing The Right Cover - Canon iR C3380 series Service Manual

Chapter 10
[1]
[5]
2) Remove the fan shutter motor [1].
- 1 cable clamp [2]
- 1 connector [3]
- 2 screws [4]
[3]
[4]

10.5.30 Right Door

10.5.30.1 Before Removing the Right Cover

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the rear right cover. (page 10-13)[Detaching the Rear Right
Cover]

10.5.30.2 Removing the Right Cover

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Open the right cover [1].
2) Remove the 2 connectors [2], 2 reuse bands [3] and 4 screws [4].
[3]
While Attaching the Right Cover
When attaching the right cover, tighten the screws after placing the position-
ing plate into the proper position following the steps described below.
1) Attach the right cover positioning plate [1].
2) Tighten the 3 screws [2].
10-32
[4] [3] [2]
F-10-130
[2]
[1]
F-10-131
[4]
[4]
[4]
[2]
[2]
[3]
[1]
F-10-132
[5]
While Closing the Right Cover
Make sure the processing unit is restored back to its original position before
closing the right cover.
If the right cover is closed when the processing unit is not completely re-
stored, the high-voltage contact of the secondary transfer roller will pierce
the ITB belt causing a broken ITB belt.
0014-0638
0014-0639
[1]
[1]
[2]
F-10-133
F-10-134
F-10-135