Upgrading Overview - Canon iR C3380 series Service Manual

Chapter 18

18.1.2 Upgrading Overview

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The software for the copier and the accessories can be upgraded by the following procedures.
- By download from the personal computer (hereafter PC) in which the service support tool (hereafter SST) is installed.
- By download from the USB memory.
- By changing ROM-DIMM (Boot, G3FAX, G4FAX* only).
Machine
Product
name
Host Machine iRC3380
iRCXXXX
Accessory FIN_Z3C
FIN_Y
* only 100V machine
18-2
SST display
System software SST
name
SYSTEM yes
LANGUAGE yes
RUI yes
BOOT yes
MEAPCONT yes
TTS yes
ASR yes
BROWSER yes
DCON yes
RCON yes
TSTAMP * yes
HELP yes
WebDAV yes
G3FAX yes
G4FAX * yes
SDICT yes
KEY yes
FIN_CON yes
FIN_CON yes
T-18-2
Upgrading tool Remarks
USB ROM-
Memory DIMM
Change
yes -
yes -
yes -
yes yes
yes -
yes - Using at the expansion of the Voice Guidance Kit (accessory)
yes - Using at the expansion of the Voice Operation Kit (accessory)
yes - Using at the expansion of the Web Browser Expansion Kit
(accessory)
yes -
yes -
yes - Using at the expansion of the Time Stamp PDF Expansion Kit
(accessory*)
yes -
yes -
yes yes Using at the expansion of the Super G3 Multi-Line Fax Board-J1
(accessory).
yes yes Using at the expansion of the G4 FAX Board-E1 (accessory*)
yes - Using at the expansion of the Searchable PDF Kit (accessory)
yes -
- - Using at the expansion of the Finisher-Z1 (accessory).
A special service tool (Downloader PCB: FY9-2034) is needed.
- - Using at the expansion of the Finisher-Y1 and the Saddle Finisher-
Y2 (accessories).
A special service tool (Downloader PCB: FY9-2034) is needed.
0013-9794