Removing The Control Panel Key Pcb; Control Panel Inverter Pcb; Before Removing The Control Panel Inverter Pcb; Removing The Control Panel Inverter Pcb - Canon iR C3380 series Service Manual

10.5.17.2 Removing the Control Panel KEY PCB

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the lower left cover [1] of the control panel.
- 2 screws [2]
2) Remove the lower cover [3] of the control panel.
- 3 screws [4]
[4]
3) Detach 6 connectors [1] from the control panel CPU PCB.
4) Detach 2 connectors [2] from the control panel inverter PCB.
5) Detached the cables from 3 cable clamps [3] and 2 edge saddles [4].
[4]
[3]
6) Remove the metal sheet [1].
- 2 screws [2]
[1]
[2]
7) Remove the frame [1] inside the control panel.
- 12 screws [2]
[2]
[2]
8) Remove the control panel KEY PCB [1].
- 5 screws [2]
[2]
[3] [1]
F-10-100
[2] [1]
[1]
F-10-101
F-10-102
[2]
[1] [2]
F-10-103
[1]
0014-2588

10.5.18 Control Panel Inverter PCB

10.5.18.1 Before removing the Control Panel Inverter
PCB
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the control panel. (page 10-19)[Detaching the Control Panel]

10.5.18.2 Removing the Control Panel Inverter PCB

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the lower left cover [1] of the control panel.
- 2 screws [2]
2) Remove the lower cover [3] of the control panel.
- 3 screws [4]
[4]
3) Remove the control panel inverter PCB [1].
- 3 connectors [2]
- 4 screws [3]
[2]

10.5.19 Main Power Switch

10.5.19.1 Before Removing the Main Power Switch

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Detach the rear upper cover. (page 10-14)[Detaching the Rear Upper
Cover]
2) Detach the rear lower cover. (page 10-15)[Detaching the Rear Lower
Cover]

10.5.19.2 Removing the Main Power Switch

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) After removing the 4 fastons [1], detach the main power switch [2] (snap
stop).
[2]
F-10-104
[3]
F-10-105
[3] [2] [3]
[3] [2] [3]
F-10-106
Chapter 10
0014-2589
0014-2590
[2]
[1]
[1]
0014-2616
0014-2617
10-27