The machine uses an on-demand method, which tends to require less heat than other methods. The machine's heater heats up fast and does not require power in a

standby state, with the ultimate result that the machine is characterized by a short wait time and high energy efficiency.

The machine's pressure roller has a higher potential than the fixing sleeve, thus enabling the full retention of the negatively charged toner on paper and, at the same

time, preventing adhesion of toner to the fixing sleeve.

step 7: fixing

In this step, the toner on the paper is subjected to heat and pressure so that it will melt (while mixing colors) to create a permanent image.

ITB

Secondary transfer inside roller

F-7-10

Fixing sleeve

Fixing heater

F-7-11

Paper

Static

eliminator