Installation Of The Toner Retainer; Connection Of The Cable; Attaching Other Parts - Canon iR C3380 series Service Manual

Chapter 2
19) Fix the process unit in place with 2 screws that were removed in the step
5) to attach the handle cover.
Close the lower right cover of the main body after fixing surely the process
unit. The position of the process unit may be displaced in closing the lower
right cover of the main body first.
20) Close the lower right cover of the host machine.

2.2.5 Installation of the Toner Retainer

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Take out the toner retainer Bk [1] from the protection package and shake
it 5 times from side to side.
2) Set the toner retainer Bk [1] to the host machine, and turn the lever [2] in
the direction of the arrow to lock.
2-8
[1]
F-2-25
[1]
F-2-26
0013-8254
3) Set the rest of the toner retainers in the same way.
4) Close the front door.

2.2.6 Connection of the Cable

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Fix the reader communication cable [2] in place with the 3 wire saddles
[1] to connect the connector of the both sides to the main body.
2) Connect the power cable (for outlet) of the main body.
3) Turn on the main power switch.

2.2.7 Attaching Other Parts

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
<Service book container>
1) Remove the release paper of the double-sided tape on the rib area of the
service book container [1], and attach the service book container on the
bottom plate of the pedestal.
[1]
[2]
F-2-27
[1] [2]
[1]
F-2-28
0013-8405
0013-8257