Canon iR C3380 series Service Manual page 525

Sub item
LED-CHK
LED-OFF
KEY-CHK
TOUCHCHK
7. PART-CHK
Sub item
CL
CL-ON
FAN
COPIER>FUNCTION>PANEL
Used to check that operation panel's LEDs light.
Operation method
1) Select this item, then press the OK key to start the operation.
The LEDs light sequentially.
2) Press LED-OFF to end the operation.
Used in checking that operation panel's LEDs light.
Operation method
1) Selecting this item stops the LED-CHK operation.
Used to check key input.
Operation method
1) Select "KEY-CHK" to display the number/name of the entered key.
2) Press the key to check. If the key is normal, the text for it appears in the
touch panel (see separate table) .
3) Select "KEY-CHK" again to exit the key input check operation.
Used to adjust coordinate positions of analog touch panel.
Operation method
- Used to align the touch panel touch position with the LCD coordinate position.
- Perform this service mode item if you have replaced the LCD unit.
1) Select "TOUCHCHK" to display the item in reverse, then press the OK key.
2) "+" appears on the touch panel at 9 positions sequentially. After you press each position, adjustment is complete.
Ke
0 to 9, #, *
Reset
Stop
User mode
Start
Power save
Clear
Secret code
Help
Counter check
COPIER>FUNCTION>PART-CHK
Used to specify clutch for operation check.
(Range: 1 to 10, 5 and above are reserved.)
Operation method
1) Select this item.
2) Enter the desired clutch code on the numeric keypad.
1: Two-sided registration clutch CL1
2: Two-sided paper feed clutch CL2
3: Conveyor clutch CL1 (paper deck)
4: Paper feed clutch CL2 (paper deck)
3) Press the OK key.
4) Press CL-ON, and check the operation.
Used to start clutch operation check.
Operation method
1) Select this item, and press the OK key. The clutch turns ON/OFF in the pattern below.
0.5 second ON -> 10 seconds OFF -> 0.5 second ON -> 10 seconds OFF -> 0.5 second ON -> OFF
Specify fan checking the operation.
Setting range: 1 to 10 (7 or above are reserves)
Operation method
1)Select the item.
2)Enter the fan code with the numeric keypad.
1: Power supply exhaust fan 1 (FM1), Power supply exhaust fan 2 (FM10)
2: Fixing exhaust fan (FM2)
3: Machine exhaust fan (FM3)
4: Cleaner fan (FM4)
5: Delivery cooling fan (FM5)
6: Manual feed cooling fan (FM6)
7: Delivery vertical path cooling fan (FM8)
8: ITB cooling power supply fan (FM11)
9: Vertical path delivery exhaust fan (FM13)
10: Face-down tray cooling fan (FM12)
3)Press [OK].
4)Check the operation by pressing [FAN-ON].
Description
T-17-47
Input key numbers, names
Screen display
0 to 9, #, *
RESET
STOP
USER
START
STAND BY
CLEAR
ID
?
BILL
T-17-48
Description
Chapter 17
level.
1
1
1
1
level.
1
1
1
17-41