Timing Of Increasing The Count; Fans - Canon iR C3380 series Service Manual

Chapter 10
Model Counter 1
100V total 2
*1
****
102
120V total 1
TW
*2
101
120V total 1
UL
*3
101
230V total 1
*4
101
240V total 1
CA*5
101
230V total 1
AMS*6
101
Guide to Notations
large: large-size paper (longer than 364 mm in feed direction; count increased by 1).
small: small-size paper (364 mm in feed length or shorter).
total: all (C+P; count increased by 1).
duplex: duplexing (in auto duplexing; count increased by 1).
- The 3-digit number in the counter column indicates the setting of the following service mode item: COPIER >OPTION >USER > COUNTER1 to 6
- counters 2 through 6 may be changed using the following service mode item: COPIER>OPTION>USER.
*1: F14-3019/3011/3029/3012/3049/3014/3059/3015
*2: F14-3001
*3: F14-3031
*4: F14-3041/3060/3070/3044 /3048/3078
*5: F14-3061/3068
*6: F14-3091/3094
**: by default, not indicated; may be changed in service mode.
***: if '0' is set for the following: COPIER>OPTION>USER>CNT-SW.
****: if '1' is set for the following: COPIER>OPTION>USER>CNT-SW.

10.2.2 Timing of Increasing the Count

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The machine increases the count depending on the selected mode (single-sided, double-sided), delivery location, and the type of accessory connected to it.
1. Single-Sided Print, 2nd Side of a Double-Sided Print
In the case of a single-sided print or the 2nd side of a double-sided print, the machine increase the count when the trailing edge of paper is discharged outside
the machine, as indicated by the output of the following sensor:
Condition
w/o finisher
w/ finisher
2. 1st Side of a Double-Sided Print
The machine increases the count when the duplexing paper absent sensor(PS10) goes on, assuming that the printing on the 1st side is over.

10.3 Fans

10.3.1 Overview
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The machine is equipped with the following fans arranged as shown in the diagram:
Notation Name
FM1 Fixing exhaust fan (front)
FM2 Fixing exhaust fan (rear)
FM3 Front process unit fan
FM4 Power supply fan
FM5 Controller fan
FM6 Edge cooling fan (front)
FM7 Edge cooling fan (rear)
10-2
Counter 2 Counter 3
copy total A
(full color + mono (full color + mono
color; 2) color; 2)
231 148
total copy + print
(black-and-white 1) (full color, large)
108 401
total copy
(black-and-white 1) (full color + mono
color, large)
108 229
total copy + print
(black-and-white 1) (full color, large)
108 401
total copy
(black-and-white 1) (full color + mono
color, large)
108 229
total total
(full color + mono (full color + mono
color, large) color, small)
122 123
Delivery location
to tray 1
to tray 2
to tray 3
Filter 2-speed
control
absent absent
absent absent
present absent
absent absent
absent absent
absent absent
absent absent
Counter 4
copy
(black-and-white 2)
222
copy + print
(full color, small)
402
copy
(full color + mono
color, small)
230
copy + print
(full color, small)
402
copy
(full color + mono
color, small)
230
total
(black-and-white,
large)
112
T-10-2
sensor
No. 1 delivery sensor (PS27)
No. 2 delivery sensor (PS1A)
No. 3 delivery sensor (PS5A)
delivery sensor of finisher
T-10-3
Remarks
Cooling the fixing unit.
Cooling the fixing unit.
Cooling the process unit.
Cooling the power supply.
Cooling the controller.
Cooling the edge of the fixing unit.
Cooling the edge of the fixing unit.
Counter 5 Counter 6
total A not indicated**
(black-and-white 2)
133 000
total not indicated **
(mono color 1)
118 000
print print
(full color+ mono (full color + mono
color, large) color, small)
321 322
total total 1
(mono color 1) (duplex)
118 114
print print
(full color + mono (full color + mono
color, large) color, small)
321 322
total scan
(black-and-white, (total 1)
small)
113 501
Error code
805-0001
805-0002
807-0001
804-0000
840-0000
840-0000
0013-8657
0013-8659