Duplexing Re-Pickup Control; Sequence Of Image Formation; Flow Of Paper - Canon iR C3380 series Service Manual

Large size (A3 or larger)

8.9.3 Duplexing Re-Pickup Control

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The timing of duplexing pickup is determined with registration clutch ON of the previous paper as trigger, as in the case of the pickup control of cassette pickup.
When specified interval (cassette holder, time due to the size) passed after registration clutch ON for the previous paper, the timing of re-pickup is generated and
re-pickup is started.

8.9.4 Sequence of Image Formation

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The order of duplexing image forming is shown as in the following chart.
- Configuration Without an Accessory Installed
However, in the case of delivery to tray 3 (outside), the machine uses single-sheet circulation.
- Configuration with an Accessory Installed

8.9.5 Flow of Paper

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
A4/LTR, 5 Sheets, Delivery to Tray 1/2
A number in a circle indicates the 1st side, while a number in a square indicates the 2nd side.
A4/LTR
1-2 2-2 1-1 3-2 2-1
4 sheets
A4/LTR
1-2 2-2 1-1 3-2
5 sheets
A4/LTR
1-2 2-2 1-1 3-2
6 sheets
A3/LDR
1-2 2-2
3 sheets
1-1
1-2
5 sheets
1-2 1-1 2-2 2-1
indicates the 1st side of the 1st sheet
1-1
indicates the 2nd side of the 1st sheet
1-2
3
4-2 3-1 4-1
2-1 4-2 3-1 5-2 4-1 5-1
2-1 4-2 3-1 5-2 4-1 6-2 5-1 6-1
1-1 3-2 2-1
F-8-30
3-2 3-1 4-2 4-1 5-2 5-1
F-8-31
Chapter 8
1
3-1
0014-3156
0014-0335
0014-0332
8-25