4) Detach the blanking plate [1] (Do not use the detached blanking plate).
- 2 screws [2]
5) Attach the board support plate [2] to the voice operation board [1].
- 2 screws (TP; M3X6) [3]
- 2 washers [4]
- 2 hex screws [5]
Check the Slide Switch SW1 on the Voice Operation Board
The slide switch SW1 on the voice operation board is mounted to switch between in accordance with the transfer speed of PCI bus.
[2]
[1]
[2]
F-2-141
F-2-142
[3]
[4]
[5]
[4]
[5]
F-2-143
[2]
[2]
[1]
[2]
[1]
[2]
Chapter 2
2-49