Canon iR C3380 series Service Manual page 117

5) Fix the hinges to DADF with stepped screws (M4X10) [1]. Use one screw for the left side and two for the right side. Tighten them so that DADF is aligned
against the left side of the unit when closing DADF.
6) Open the DADF feeder cover [1] and separation guide [2].
7) Attach the stamp [1] using tools such as tweezers. Attach the stamp with the stamped surface upside.
Incomplete fixation of the stamp results in jam. Press the stamp until it clicks.
F-2-178
F-2-179
F-2-180
[1] [2]
F-2-181
Chapter 2
2-61