Troubleshooting; Malfunction; Malfunction/Faulty Detection; Ng Is Displayed At The Time Of Toner Supply (The Service Mode) After The Machine Installation - Canon imageRUNNER 5065 series Service Manual

Chapter 15

15.2 Troubleshooting

15.2.1 Malfunction

15.2.1.1 Malfunction/Faulty Detection

15.2.1.1.1 NG is displayed at the time of toner supply (the service mode) after the machine installation.

iR5065 / iR 5055 / iR5075 / / /
Symptom:
During the toner stirring operation (the service mode) after the machine installation, NG may be displayed on the control panel.
Cause:
Due to the operational error, NG may be displayed during the toner stirring operation (the service mode) after the machine installation, result in stopping the stirring
operation.
Action in the Filed:
1) Open/close the toner supply cover.
2) If NG is still displayed, go on to the next step.
3) Open the toner supply cover, and reset the toner bottle.
4) After closing the toner supply cover, execute the following service mode:
COPIER > FUNCTION > INSTALL > TONER-S

15.3 Outline of Electrical Components

15.3.1 Clutch/Solenoid

15.3.1.1 Clutches and Solenoids

iR5065 / iR 5055 / iR5075 / / /
<Reader Unit>
The reader unit does not have clutches and solenoids.
<Printer Unit>
Notation Name
CL1 developing cylinder clutch
CL2 registration clutch
CL3 manual feed pickup clutch
CL4 left deck pull-off clutch
SL1 fixing inlet guide drive solenoid
SL2 manual feed pickup solenoid
SL3 cassette 3 pickup solenoid
SL4 cassette 4 pickup solenoid
SL5 delivery flapper solenoid
SL6 right deck pickup solenoid
SL7 left deck pickup solenoid
SL8 reversing flapper solenoid
SL9 fixing web drive solenoid
Notation Parts No.
CL1 FK2-0852
CL2 FK2-0856
CL3 FK2-0851
CL4 FK2-0850
SL1 FK2-0841
SL2 FK2-0832
SL3 FH7-5702
SL4 FH7-5702
SL5 FK2-0835
SL6 FK2-0836
SL7 FK2-0836
SL8 FK2-0838
SL9 FK2-0839
15-2
T-15-1
Description
drives the developing cylinder
drives the registration roller
drives the manual feed pickup roller
drives the left deck pull-off roller
drives the fixing inlet guide
drives the manual feed pickup solenoid release
drives the cassette 3 pickup
drives the cassette 4 pickup
drives the delivery flapper
drives the right deck pickup
drives the left deck pickup
drives the reversing flapper
drives the fixing web
T-15-2
PART-CHK
CL>4
CL>5
CL>1
CL>2
SL>9 (recover)
(SL10) (plunger drawn)
SL>5
SL>3
SL>4
SL>7
SL>1
SL>2
SL>8
SL>11
Duplexing drive PCB Motor driver PCB
J2105/ J2101
J2306/ J2302
0016-1850
0015-5383
Remarks
DC controller PCB
J108
J106
J108
J115
J106
J108
J110
J110
J106
J104
J102
J107
J106