Connecting A Video Cable Assembly To A Monochrome Monitor - DEC DECstation 5000 Model 100 Series Hardware Operator's Manual

Turn the signal cable
connector to your
right until it slides
forward and locks
into place.
Turn the threaded
connector to your right.
Figure 2-8. Connecting a video cable assembly to a monochrome
2–10 System Unit, Monitor, Keyboard, Mouse, and Tablet
Monochrome monitor
Press the threaded signal cable connector onto the
a.
system unit video connector to tighten it.
Align the slots on the collar of the signal cable
b.
connector with the pins on the monitor video
connector.
Push the slotted signal connector onto the monitor
c.
video connector. Then twist the connector to the
right to lock it.
monitor
Monitor video
connector
0
1 V~1 00-1 20
V~2 20-2 40
2
V~1 00-1 20/
A 7.9/ 4.2
3 Hz 50-6 0
W 359
2
System unit
video connector
0 0
WS33O075