Inserting A Memory Module - DEC DECstation 5000 Model 100 Series Hardware Operator's Manual

Tilt the top of the memory module toward the front of the
3.
system unit and insert the memory module into the empty
connector.
Make sure the mounting holes in the module line up with
4.
the mounting posts at the ends of the connector, as shown
in Figure 5-7.
Tilt the top of the memory module up and press the module
5.
against the mounting posts until the module snaps past the
spring clips. These clips lock the memory module onto the
mounting posts.
Figure 5-7. Inserting a memory module
5–10 Internal Hardware Options
Mounting hole
Four memory modules
already installed
Mounting post
Memory slot numbers
Spring clip
WS33I104