DEC DECstation 5000 Model 100 Series Hardware Operator's Manual page 113

Choose the end of the Ethernet cable that has no sliding
5.
lock. Hold it so that the widest part of the connector faces
up.
Push the connector all the way into the ThickWire Ethernet
6.
connector on the system unit.
Use your finger or a simple tool, such as a flat-blade
7.
screwdriver, to slide the connector lock on the system unit.
Connect the other end of the cable to the Ethernet network
8.
cable the same way.
Follow the directions in the section "Finding Your Ethernet
9.
Station Addresses", on page 6-13, to find the address of the
Ethernet controller that you are using.
0
PM AG -C
1
Figure 6-4. Connecting a ThickWire Ethernet cable to the system unit
V~ 100 -12
0 A 3.0
V~ 220 -24
0 A 1.7
2
V~ 100 -12
0/2 2
A 7.9 /4.2
Hz 50- 60
W 359
2
Base system ThickWire Ethernet
connector with sliding lock
ThickWire Ethernet cable
Optional Network Connections 6–5
WS33O017