Cat - DEC DECstation 5000 Model 100 Series Hardware Operator's Manual

The following example of the boot command uses the options
and arguments set in the boot environment variable:
boot
The following command boots from a tape drive (tz5) in base
slot 3; tz5 is the SCSI code of the drive:
boot 3/tz5
The following command boots from the network that is
connected to your workstation at option slot 2:
boot 2/mop
The following example shows a multiuser boot (-a) using the
vmunix file on an internal drive (rz1) in base slot 3; rz1 is the
SCSI code of the drive:
boot 3/rz1/vmunix -a

cat

>>cat #/scriptname
The cat command displays the contents of the script specified
by scriptname. The # argument indicates the number of the
slot where the script is stored.
11–10 Using the Console Commands