DEC DECstation 5000 Model 100 Series Hardware Operator's Manual page 84

The difference in these two displays is that
4.
in the column of the second display. Write down any
DEV
device codes that appear in the
In this example, we would write down
Turn off the system unit by pressing the 0 on the on/off
5.
switch on the back of the unit.
Remove the cover from the system unit, as shown in
6.
Figure 5-1, on page 5-3.
Place the loop of the antistatic strap around your wrist and
7.
clip the other end of the strap to the metal frame of the
system unit.
Unpack the hard disk drive that you are installing.
8.
Figure 5-16, on page 5-30, shows a typical drive.
appears
tz1
column of your display.
DEV
tz1.
Internal Hardware Options 5–29