To Position The Connector Block; Positioning The Connector Block - DEC DECstation 5000 Model 100 Series Hardware Operator's Manual

To Position the Connector Block

Hold the connector block so the keyboard and mouse icons
1.
are on top.
Tilt the monitor base forward slightly and slide the flap on
2.
the connector block under the base.
Lower the monitor base onto the flap. Be sure that the
3.
whole flap is under the base.
WS33O031
Figure 2-15. Positioning the connector block
0
2
3
2
System Unit, Monitor, Keyboard, Mouse, and Tablet 2–17
V~ 10 0-1
20 A 3.0
V~ 22 0-2
40 A 1.7
0/2 20 -2
40
Connector
block
Flap