Position the SCSI cable connector so the key is on top, as
9.
shown in Figure 5-22.
Plug the cable connector into the SCSI connector on the
10.
hard disk drive.
Key
SCSI cable
connector
Figure 5-22. SCSI connector
If you are installing two hard disk drives, unpack the
11.
second drive as described in Appendix D, and connect the
appropriate power supply cable and SCSI cable to it.
Tilt the hard disk drive as shown in the large circle in
12.
Figure 5-23, on page 5-38.
Pull on this
flap.
Internal Hardware Options 5–37
WS33O106