Find the bezel for the drive that you installed.
14.
Press the new bezel into the opening in the system unit
15.
cover from the front of the cover.
D E C
s ta ti o
n 5 0
0 0 /1
2 0
Bezel
Figure 5-29. Installing a new bezel
Replace the cover on the system unit, as shown in
16.
Figure 5-1, on page 5-3.
Be careful not to catch the end of the SCSI cable in the
Caution:
cover.
Turn on the system unit and monitor and test the drive
17.
with the
cnfg
command.
System unit cover
Internal Hardware Options 5–51
WS33M023