Module Codes - DEC DECstation 5000 Model 100 Series Hardware Operator's Manual

Table 11-2. Module Codes
Code
MX
CX
PX
DA: PXG
EA: PXG
FA: PXG_T
SCSI
enet:
24 MB
11–14 Using the Console Commands
Description
Monochrome frame buffer.
Color frame buffer.
2D graphics accelerator.
Low 3D graphics accelerator. Installed in two adjacent
slots, but shown as being installed in the lower-
numbered slot.
Mid 3D graphics accelerator. Installed in two adjacent
slots, but shown as being installed in the lower-
numbered slot.
High 3D graphics accelerator. Installed in all three
slots, but shown as being installed in slot
SCSI module. Base slot 3 always has a SCSI module.
Ethernet module. Base slot 3 always has a ThickWire
Ethernet module. Every Ethernet module has a unique
Ethernet station address that identifies the module for
the network software. The long number after
in the parentheses is the Ethernet station address. For
example, the Ethernet address for the module in slot 1
in the sample display is 08-00-2b-0f-45-72.
Memory module. Base slot 3 always contains a memory
module. The number indicates how many megabytes of
memory are installed. In the sample display, the system
unit has 24 megabytes of memory.
1 .
enet: