Connect any additional expansion boxes.
6.
a.
b.
c.
Figure 8-6. Connecting expansion boxes in a chain
8–10 External Storage Devices
Plug one end of an 18-inch box-to-box expansion cable
into the unused SCSI connector on the back of the
expansion box on the end of the chain.
Plug the other end of the cable into a SCSI connector
on the new box in the chain.
If the box is a TK50Z tape drive, slide the end of the
cable up between the box and its handle.
Repeat steps a and b for each additional box.
RRD40 optical
compact disc drive
expansion box
TLZ04 tape drive
expansion box
TK50Z tape drive
expansion box
BA42 storage
expansion box
WSE2I049