Set Up Your Storage Expansion Boxes; Expansion Box Cables And An Expansion Box Power Cord And Terminator - DEC DECstation 5000 Model 100 Series Hardware Operator's Manual

Set up your storage expansion boxes

Place the external drives for each chain as near as possible
1.
to the SCSI connector to which you will attach the chains.
For each expansion box, locate these cables and termina-
2.
tors:
Figure 8-2 shows the cables that you should use. Cable lengths
are listed in Table 8-1, on page 8-5.
System-unit-to-expansion-box cable
Expansion box terminator
Figure 8-2. Expansion box cables and an expansion box power cord
8–4 External Storage Devices
One system-unit-to-expansion-box cable that has a
different connector at each end
One expansion box terminator
One power cord for each expansion box you are using
One 18-inch box-to-box expansion cable with identical
connectors at each end for every expansion box except
the last box at the SCSI connector
and terminator
18-inch box-to-box expansion cable
Expansion box power cord
WSE2I040