Connecting A Video Cable Assembly To A Vr262 19-Inch; Gray-Scale Monitor - DEC DECstation 5000 Model 100 Series Hardware Operator's Manual

Gray-scale monitor

Hold the 3-pin connector of the cable assembly so
a.
the widest part of the connector is on top.
Firmly push the cable connector into the video
b.
option connector on the system unit.
Tighten the screws on the 3-pin connector to lock
c.
the connector securely in place.
Align the slots on the collar of the signal cable
d.
connector with the pins on the monitor video
connector.
Push the slotted signal cable connector onto the
e.
monitor video connector. Then twist the cable
connector to the right to fasten it.
Monitor video connector
Slotted signal cable connector
Figure 2-7. Connecting a video cable assembly to a VR262 19-inch
gray-scale monitor
Cable mounting detail
System Unit, Monitor, Keyboard, Mouse, and Tablet 2–9
Connector block
WS33O095