The Set Or Setenv Command - DEC 600s Owner's Manual

The help advanced Command
When you issue the
Command
Example displays a list of topics similar to the following:

The set or setenv Command

Description The
variable.
Issue the
Command
Syntax
>>> setenv environment_variable
The environment_variable parameter can be any of the
environment variables listed in Table 10–1. Setting the password
environment variable is described in Chapter 11.
Command See Chapter 10 to see how to use the
Example environment variables.
9–16 Using Console Commands
help advanced
BOOT [- FL <bflg> ] [-FI <filnam> ] <devlist>
CONTINUE
DEPOSIT [{-B | -W | -L | -Q | -A }][{-PM | -VM }][-G][-U][-N:<n>]
[{<addr> | <sym>| + | - | * | @ } [<datum>]]
EXAMINE [{-B | -W | -L | -Q | -A }][{ -PM | -VM }][-G][-U][-N:<n>]
[{<addr> | <sym>| + | - | * | @ }]
HALT
HELP [MIPS_EMULATOR | SET | SHOW]
INITIALIZE
LOGIN
REPEAT <cmd>
SET[ENV] <envar> <value>
SHOW | PRINTENV <envar>
START <addr>
TEST <devnam> [<tstnam>]
set or setenv command lets you set an environment
or command as follows:
set setenv
command, your system
Return
command to change
set