Card Area Settings; Card Type/Reader Settings; Card Setting - Sharp MX-M266N Operation Manual

When multiple users are selected
Item
Show Counts
Clear Count
Clear All Count

Card Area Settings

The data check during card reading can be set.
Settings
Item
Check Facility Code in HID
Mode
Facility Code
Import from Configuration file
Card reading test

Card Type/Reader Settings

The authentication of Felica, HID and other IC cards can be set.
When multiple users are selected
Item
Use IC Card for Authentication

Card Setting

(when the HID card reader is available.)
Configure this setting if user authentication will be performed using an HID card.
Card Reader Device Registration
In this setting, the product ID and vender ID of the connected HID card reader are displayed. To store the HID card
reader, touch the [Read] key.
* For settings that enable an HID card to be used, consult your service technician.
The counts and the number of pages remaining of the selected users are shown by function.
Reset the count of the selected item to "0".
Reset all items of the selected users to "0".
Checks the facility code of the HID card.
Enter the facility code of a HID card. When you tap the [Store] key, the facility code is stored.
Enter the configuration file name and tap the [Execute] key, and the card area settings will be
read from the configuration file.
When you tap the [Execute] key, the card reader test starts and the test result is displayed.
The authentication of Felica, HID and other IC cards can be set.
7-60
SYSTEM SETTINGS
Description
Description
Description
Contents