Forwarding Received Data; Forwarding Received Faxes (Fax Data Forward) - Sharp MX-2630N User Manual

FACSIMILE►FAX RECEPTION

FORWARDING RECEIVED DATA

FORWARDING RECEIVED FAXES (FAX DATA FORWARD)

When the machine cannot print because it is out of paper or out of toner, received faxes can be forwarded to another
previously stored fax machine. Store a recipient by selecting
7-186)] in Setting mode.
When printing ends, the Data Notification indicator turns off.
This function is convenient in an office or work area that has two or more telephone lines and another fax machine is
connected to a different line than the machine.
The machine
• If some pages of a fax that is being forwarded were successfully printed, only those pages that were not printed will be
forwarded.
• A forwarded fax becomes a fax transmission job. If transmission does not take place because the transmission was
cancelled or an error occurred, the fax will be held in memory until it can be printed.
• All faxes received are forwarded. Note, however, that faxes received and stored in an F-code confidential memory box
cannot be forwarded.
• If a PIN Code entry screen appears after tapping the [OK] key, "Hold Setting for Received Data Print" has been enabled.
Enter the PIN Code using the numeric keys to begin forwarding.
► PRINTING A PIN CODE-PROTECTED FAX (Hold setting for received data print) (page 4-59)
1
CLOUD PORTAL
Operation Enlarge
Guide Display Mode
Tap the [System Settings] → [Image Send Settings] → [Fax Data
2
Receive/Forward (Manual)] key.
Printing does not take place
Forward
Received Data
10:15
Easy Easy Easy
Copy Scan Fax
Settings Total Count Brightness Job Status
Adjustment
[Set the Telephone Number for Data Forwarding (page
Forward Destination
Make sure that the Data Notification
indicator is blinking, and tap the
[Settings] key in the home screen.
4-63
Prints