Selecting The Orientation And Size Of The Original - Sharp MX-B355W User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES
SELECTING THE ORIENTATION AND SIZE
OF THE ORIGINAL
The paper size that appears in the [Original] key is the paper size that is set in "Default Original Size Settings" in the system settings (administrator).
To change the original size to a different size from the size shown in the [Original] key, touch the [Original] key and set the original size.
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
Set the orientation and size of the original before scanning the original.
Specifying the orientation of the original
By specifying the starting side (top or left side) of the placed original, the orientation of the original will be correctly recognized.
Finishing position settings and N-Up layout settings are specified using the recognized orientation.
In Easy mode
Original
Image
Size Orientation
8½x11 8½x11
CA Copies
Preview Preview
Specifying the orientation and size of an inch-size original
Tap the [Original] key to set the orientation of the original.
1
► COPY MODE (page 2-3)
Tap the [Size] tab.
2
(1)
3
Tap the appropriate original size key.
4
Start
(2)
5½x8½ 8½x11 8½x13
8½x13½ 8½x14
In Normal mode
No. of copies
8½x11
5 ½x8 ½ 8 ½x11 8 ½x13
8 ½x14
8 ½x13 2 /
5
8½x11
Others
8½x11
Specifying the size of an original
(1)Tap the [AB] key for an AB original size.
Tap the [Inch] key for an inch original size.
(2)Tap the appropriate original size key.
After the settings are completed, tap the
2-29
2-Sided Copy
1
Background Adjustment
Blank Page Skip
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Preview CA
Start
key.