Cruise Control
Actuator/Solenoid/Cable Replacement
Removal/Installation
1. Disconnect the 4P connector (A) from the actuator.
2. Loosen the two mounting bolts (B), and remove the
actuator with the bracket.
3. Disconnect the vacuum hose (C).
4. Remove the three nuts (A).
5. Disconnect the actuator cable (B) from the actuator
rod (C) by releasing the clip (D) from the rod with a
screwdriver.
6. Loosen the locknut (A), then disconnect the
actuator cable (B) from the throttle linkage (C).
7. Install in the reverse order of removal, and adjust
the free play at the throttle linkage after connecting
the actuator cable.
4-52