Accessing The Storeonce Folders; Software Update Process; Upgrading Bios Or Hardware Firmware Components - HP StoreOnce 2700 Installation And Configuration Manual

Accessing the StoreOnce folders

Use an SFTP client to access the StoreOnce Backup system.
NOTE: There are a number of SFTP clients available on the internet. For example, FileZilla is a
free, open source SFTP client for Windows and Linux and can be downloaded from
filezilla-project
Using Linux
sftp Admin@<IP_address>
cd <folder_name>
Use the appropriate commands — examples are included in the following sections where
SFTP is used to carry out a specific task.
exit sftp
Using a Windows SFTP client
Ensure the File Protocol is set to SFTP, not SCP or FTP.
Login to the HP StoreOnce Backup system as Admin.
Use the appropriate commands to perform the required tasks.

Software update process

IMPORTANT:
software updates.
Download the upgrade package from the Software Depot,
swdepot/index.do. The name of the upgrade will be in the format <part_number>.rpm.
You will need an HP Passport account to download the RPM file, this can be created when they
first access the download website.
Software updates can only be performed through the StoreOnce CLI using the Admin user account.
Software updates are delivered to customers in the form of a single RPM image, which may contain
multiple rpms. Everything is updated in the same way, using the rpm package: the software, third
party components and the firmware for hardware components.
A software update is NOT an online process. Services will shutdown to perform the updates, so
the whole appliance will be offline for a period of time (see the release notes for details).
HP recommends carrying out a Firmware Check and Update immediately after a software update,
as described in the release notes.

Upgrading BIOS or hardware firmware components

Do not upgrade BIOS or hardware firmware components individually using downloads from the
HP Support website because currently supported firmware component updates are already
embedded within the StoreOnce software. Use either the StoreOnce GUI or the StoreOnce CLI to
implement BIOS and hardware firmware component checks and updates.
Firmware maintenance from the StoreOnce GUI
1. Select the Firmware page to view the firmware versions for hardware components, and to
update firmware versions if required.
The page contains the following tabs:
Server: Contains hardware components for the server.
Storage: Contains hardware components for all storage elements.
64 Completing the installation
.org.
Aalways refer to the Release notes for the most current information about installing
https://h20392.www2.hp.com/portal/
https://